Gigabit Managed Ethernet Switch INDRy II L

The INDRy II managed Ethernet Switches are especially designed for harsh and industrial environments. The switches are released for operating temperatures from -40 up to +75°and passed shock and vibration tests at high standard. Dual power inputs from 12 to 58 VDC ensure functionality in almost any power environment, while the IP30-rated housing can be mounted to DIN-rails or the wall.

The INDRy II L offers 14 Gigabit Ethernet ports to update the existing industrial network with a full Gigabit speed infrastructure. Ten ports are equipped with 10-/100-/1000 Mbps copper ports (RJ-45), four additional Multirate SFP-slots leave room for fiber uplinks. Equip the SFP-slots with any mix and match of 100FX or 1000BaseSX/LX/LH SFP-modules. If your cable infrastructure changes, just replace the SFP according to your needs.

A full Gigabit network provides a large throughput and reduces the response time for sensitive applications like video and/or voice mixed with data in the same pipeline. The powerful features and the management of the INDRY II L offer all advanced filter and multicast algorithms needed today to easily prioritize, partition and organize a reliable high-speed network.

Approvals CE; RoHS/WEEE; EN61000-6-2, EN61000-6-4;
Connectors (10) RJ-45; (4) SFP
DHCP Client, Server, Relay, Snooping, Option 82
Dimensions 6"H x 4.3"W x 2.4"D (15.4 x 10.9 x 7.7 cm)
Environmental Storage: -40 to +185°F (-40 to +85° C)
Failover Link loss recovery < 20ms; Single and multiple rings supported
Flow Control IEEE 802.3x full-duplex, Back-pressure half-duplex
Humidity 5 to 95% non-condensing
Indicators LEDs: Power, Ethernet Port
Ingress Protection IP30
Jumbo Frames 9K bytes
Link Aggregation Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
Link Layer Discovery Protocol (LLDP) IEEE 802.1ab
MAC Addresses 8K
Management CLI, WEB-based Management; SNMP v1, v2c, v3; Telnet (5 sessions);HTTPs, SSH;Radius Client for Management; TFTP/FTP for Configuration Import/Export; TFTP/FTP for Firmware Upgrade;Syslog; RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB;DHCP; NTP/SNTP
Management Security HTTPs; SSH; Radius client
MIBs RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
Multicast Protocols IGMP v1, v2 with up to 255 multicast groups; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering
Network Redundancy Fast failover protection rings: Link loss recovery <20ms; Single & Multiple rings supported;Spanning Tree Protocol: IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP; Port Trunk with LACP: Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
NTP/SNTP Yes
Operating Mode Store and forward; L2 wire-speed, non-blocking switching engine
Port Security IP and MAC-based access control; IEEE 802.1X authentication Network Access Control
Power Input: Redundant terminals, reverse power protection; 12-58 VDC;Maximum power: 11 Watts
QoS QoS - 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping traffic
Security Spanning Tree Protocol
System StatusDevice info, status;Ethernet port status
Traffic Shaper Port-based Port shaping
VLAN IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex) flow control;256 Port-based VLANs;IEEE 802.1Q tag-based VLANs;IEEE 802.1ad Double Tagging (Q in Q)
Weight 320g

(1) Hardened Managed Ethernet Switch
(4) M3 Screws
(2) Panel Mount Brackets
(1) DIN Rail Clip
(1) 6-position Phoenix Connector
(5) RJ45 Ethernet Port Dust Covers
(4) SFP Ethernet Port Dust Covers